Scientifically Matched Boiler Burner Unit
Every detail of the 6500A Boiler Burner unit for oil and gas is the result of years of research and development. The boiler, the burner, the draft system, the control system, and the combustion chamber are completely compatible. The 6500A offers a choice of four burners from top manufactures, each tailored for maximum efficiency and tested and listed by I.B.R Single source responsibiliry can be assured, whether your fuel choice be #2 thru #6 oil or gas. A wide variety of control panel options, draft systems and I.D. fans can be tailored for most any need, no other cast iron boiler company can offer you all these features.
STANDARD EQUIPMENT
All Boiler-Burner Units
- Insulated metal jacket.
- Shutter dampers.
- Pre-cast combustion chamber with insulation.
- Steel channel ventilating base, 3" high.
- Flexible return yoke.
- Bronze body, lever-operated, ball-type drain valves for return drums.
- Cleaning tools.
- Natural draft.
Steam Boilers
- 6" steam pressure gauge.
- ASME side-outlet safety valve set at 15 psi.
- M/M 157RLS water column type pump control and low water cut-off with precut ferrous pipe and fittings
- Manual reset high-pressure limit control-
- Operating pressure control-
- Modulating pressure control.
Water Boilers
- Pressure-altitude gauge.
- ASME relief valve set at 40 psi.
- M/M #63 low water cut-off with precut ferrous pipe and fittings
- 4 1/2" diam. dial thermometer with remote bulb.
- Dip tube and air removal fittings and manual vent valve-
- Manual reset temperature limit control-
- Operating temperature control-
- Modulating temperature control-
- M/M #150 low water cut-off for H.T. boilers.
|
|
